Set identification
Rotor/stator side, segment quantity, layout, rotation or refining direction.
Measurement guide
What to Measure Before Qualifying Replacement Refiner Segments
Measurements should reconstruct the mounting and set definition. Worn surfaces require engineering judgment before they are treated as original geometry.
Measurement categories
Outer / inner geometry
OD, ID, radial length, thickness and relevant seating surfaces.
Mounting
Bolt circle, hole quantity/diameter, countersink/counterbore and locating features.
Pattern reference
Bar/groove direction and measurable unworn reference areas where legally usable.
Do not clone wear
A worn sample can preserve mounting geometry while losing the original bar height, groove depth or edge condition. Reconstructed pattern geometry should be explicitly reviewed and approved.
Controlled measurement workflow
01
Identify
Mark rotor/stator side, segment position and direction.
02
Datum
Establish repeatable mounting and seating datums.
03
Measure
Capture critical fit dimensions separately from worn refining features.
04
Reconcile
Compare sample measurements with any lawful drawing or historical record.
05
Approve
Freeze a buyer-approved manufacturing definition before tooling or production.
Need to structure a measurement package?
Indicate whether dimensions, a sample or a controlled drawing are available for later private review.